AMOSi:Serial Status
Revision as of 23:54, 19 November 2007 by Spellcoder (talk | contribs) (converted list of returned bit-parameters to a table)
an example can be found on AMOSPro_Examples:Examples/H-4/Help_47.AMOS
Provides you with detailed information about the current state of the serial port.
s=Serial Status(channel)
s is a bit-map holding the state of fifteen different parameters.
If the bit is set to the value under "active", the associated event has been successfully detected.
Bit | Active | Function |
---|---|---|
0-1 | - | reserved |
2 | 1 | Parallel "select" on the A1000 |
3 | 0 | DSR (Data Set Ready) |
4 | 0 | CTS (Clear To Send) |
5 | 0 | Carrier Detect |
6 | 0 | RTS (Ready To Send) |
7 | 0 | DTR (Data Terminal Ready) |
8 | 1 | hardware overrun |
9 | 1 | break sent (most recent output) |
10 | 1 | break received (as latest input) |
11 | 1 | transmit x-OFF |
12 | 1 | receive x-OFF |
13-15 | - | reserved |